10 Common Reasons Pit Boss Display Not Working (Fixes Added)

Are you having trouble with your Pit Boss Display not working? You’re not alone! Many users have reported this issue, and it can be quite frustrating. 

Fortunately, there are some steps you can take to try and fix the problem. 

In this article, we’ll look at what could be causing the display to malfunction and provide troubleshooting tips for fixing it. 

Pit Boss Display Not Working

Pit Boss Display Not Working

1. Poor power connection

The poor power connection can be the root cause of a Pit Boss display not working. 

This might happen if the power cable has been damaged or disconnected, or if there is a voltage issue in the outlet. 


To troubleshoot this issue, first, check the power cable for any signs of damage. 

If it appears to be intact, then try plugging it into another outlet with a known good voltage level. 

If the problem persists, then it may be necessary to inspect and replace the power cable.

2. Dead battery

A dead battery can be a cause of a pit boss display not working. 

This could be because the batteries that power the display have gone bad or are no longer holding a charge. 


To fix this, it is recommended to replace the batteries with new ones that meet the specifications of the device. 

Also, it is important to make sure to only use high-quality batteries in order to extend the lifespan of the device and avoid any further issues or malfunctions. 

3. Overheating

Overheating in a pit boss display can be caused by several factors, including lack of ventilation, poor air circulation, and a malfunctioning fan. 


To resolve this issue, ensure that the area where the pit boss is being used is well-ventilated and the fan is in proper working order. 

More, if the unit has been running for an extended period of time, it may need to be powered off and cooled down before being restarted again. 

This should help to dissipate heat buildup within the unit and restore its functionality.

4. Damage Physically

Damage to the Pit Boss Display can occur if it is not handled properly. 

This could include dropping, over-tightening screws, or applying too much pressure on connectors. 

In some cases, physical damage may also arise as a result of poor maintenance and repair. 


To avoid physical damage to the Pit Boss Display, it is important to handle it with care and follow any instructions provided in its user manual. 

It is also essential to ensure that any maintenance or repair work is done by qualified professionals who are familiar with the product.

5. Aging Parts

Aging parts can be a common cause for Pit Boss Display Not Working. 

As components get older, they can become more prone to irregularities and malfunctions due to an increase in wear and tear. 


While some aging parts can be replaced with new components, it is usually best to upgrade the entire system instead, as this will ensure that all of the necessary components are compatible and up-to-date for optimal performance. 

Additionally, regular maintenance should be conducted on systems with aging parts in order to prevent any further issues from arising.

6. Obsolete software/firmware

When a Pit Boss display is not working properly, it could be due to outdated software or firmware. 

The best way to ensure that the Pit Boss display is up-to-date with the latest version of software/firmware is to regularly check for updates. 


It’s important to do this on a regular basis as older versions may become incompatible with new hardware components or have security vulnerabilities that can be exploited by malicious actors. 

Besides, some software/firmware issues can be resolved by simply restarting the device and clearing out any cached memory, which can happen when the device is running for an extended period of time without being restarted. 

If these steps don’t work, it’s best to contact technical support from the manufacturer or a qualified technician for assistance in resolving the issue.

7. Corrupted memory

The Pit Boss display not working could be caused by corrupted memory. 

Memory corruption is when data stored in a memory location is unintentionally changed due to software bugs, hardware faults, or other external influences. 

In the case of a Pit Boss display, this may manifest as incorrect images or text being displayed on the screen, or even no image at all. 

Corrupted memory can also cause issues with the system booting up or responding to commands. 


It is essential to identify and address any potential memory corruption issues as soon as possible, as they can cause significant disruption and damage to the system. 

If your Pit Boss display is having problems displaying content correctly, it may indicate corrupted memory and should be addressed immediately.

8. Malfunctioning hardware

Malfunctioning hardware can be caused by a variety of issues, ranging from physical damages or defects in the circuit board to electrical and software-related problems. 

Physically damaging the hardware can cause chips or components to malfunction, resulting in an inability of the Pit Boss display to function properly. 

Electrical issues can arise because of improper wiring or power supply overloads. 

Additionally, software-related faults such as outdated drivers or incompatible operating systems can lead to failures with the display. 


To resolve these hardware issues, one must determine the root cause and replace the necessary parts or components. 

Also, reinstalling any outdated drivers or updating the pit boss’s operating system may help resolve software-related issues.

9. Damaged Display Cables

Damaged display cables can cause the pit boss display to stop working. 

When a cable is damaged, it may not be able to transmit data accurately between the device and the display. 

This can lead to errors in the display or cause it to stop responding altogether. 

The best solution for this problem is to replace the damaged cables with new ones. 


It’s important to make sure that the cables are of high quality and properly connected in order for them to work correctly. 

Additionally, it’s best to avoid bending or twisting the cables as this could also cause them to become damaged over time.

10. Poor Wiring

Poor wiring can be a major issue when it comes to a Pit Boss display not working. 

Poor wiring can lead to short circuits, which in turn can cause damage to the device’s power supply and circuitry. 

Wiring that is too loose or brittle due to age or environmental factors can also cause the display to malfunction. 


To avoid this issue, make sure all wires are properly connected and their insulation is intact. Additionally, replace old, worn-out wires with new ones and inspect the connections regularly.

 If a short circuit does occur, switch off the power immediately and have the device serviced by a qualified technician as soon as possible.


if you’re having trouble with your Pit Boss display not working correctly, it could be a sign of an internal problem. 

If the issue persists after rebooting and resetting the device, then you may need to take it in for repair or replacement. 

Fortunately, there are many online resources available that can help troubleshoot these types of issues so that you can get back to grilling as soon as possible. 

With some research and patience, hopefully, this guide has helped you figure out what is causing your Pit Boss display issue and how to fix it quickly!


How do you troubleshoot a Pit Boss grill?

To troubleshoot a Pit Boss Grill, first, check the power supply and ensure that all connections are secure. Then check to see if there is an air blockage in the burners or tubes. 

If necessary, clean out debris from the burners or replace any burned-out parts. Finally, check for signs of corrosion and clean off any buildup that might be interfering with proper operation.

Why is my Pit Boss not lighting?

The most common cause of a Pit Boss not lighting is an air blockage in the burners or tubes. 

You should also check for signs of corrosion and clean off any buildup that might be interfering with proper operation.

Why is it flashing on my Pit Boss?

The flashing display on your Pit Boss can indicate a number of issues, such as an air blockage in the burners or tubes, signs of corrosion, or buildup obstructing proper operation. 

Additionally, it could be an indication that a burned-out part needs to be replaced.

Pit Boss Kc Combo Problems

Pit Boss Pro Series 850 Problems

Pit Boss Auger Not Turning

Kamado Joe Not Getting Hot Enough

My Charcoal Won’t Light

Z Grill Temperature Too High

Traeger Scout Problems

Traeger Meat Probe Problem

Scroll to Top