Whirlpool Duet Dryer Stuck On Sensing (With Fixes)

Are you experiencing a Whirlpool Duet Dryer that is stuck on sensing mode? You’re not alone. Many have experienced this issue and fortunately, there are several potential fixes for it. 

In this article, we will discuss the causes of why your Whirlpool Duet dryer may be stuck in sensing mode as well as provide some tips to help get it back up and running again. 

We’ll also cover some preventative measures so you don’t experience this problem in the future. So read on to find out more!

Whirlpool Duet Dryer Stuck On Sensing

1. Overloaded Drum Of The Dryer 

The Whirlpool Duet dryer is designed to sense when the drum has become overloaded with clothing, towels, or other items. 

This overload protection mechanism is designed to protect the motor from overworking and prevent potential damage to the dryer. When this overload sensing system is activated, the dryer will stop working and display an “Sd” error code.

If your Whirlpool Duet dryer has become stuck on sensing, you should first check the drum of the dryer to ensure that it is not overloaded with clothes or other items. 

Try removing some clothing from the drum and then restarting the dryer; if this does not work, you may need to reset the overload protection system.

2. Control Panel Interface Connection Problem

Your Whirlpool Duet Dryer may be stuck on sensing due to a control panel interface connection problem.

This issue can cause the dryer to not start, or it may take several attempts before it begins working again. It can also lead to inaccurate readings of temperature and time settings, as well as other errors that make your dryer unreliable and inefficient.

To fix this issue, you need to check all connections between the control panel and the main board for any loose wires or faulty connectors. If everything looks okay, then you should replace the control panel interface with a new one in order to restore proper functioning of your Whirlpool Duet Dryer.

3. Moisture Sensor Issue

The Whirlpool Duet Dryer is equipped with a moisture sensor that helps to determine how much time the drying cycle will take. When this sensor has an issue, the dryer can remain stuck on the sensing phase of its cycle. 

This issue can be caused by a number of factors, including a faulty moisture sensor itself, inadequate air flow, or a clogged vent system.

In many cases, this issue can be resolved by simply cleaning the lint screen and vent system. If that doesn’t fix it, you should try checking the moisture sensor itself for any signs of damage or corrosion. If there is any evidence of wear or damage to the sensor, then it should be replaced.

4. Start Switch May Be Defective

The Whirlpool Duet dryer may be stuck on sensing due to a defective start switch. The start switch is an electrical component that allows the machine to begin drying clothes when pressed. 

When the start switch is defective, it will fail to connect with the other electrical components in the dryer and will cause it to remain stuck in sensing mode. 

To determine if the start switch is the cause of your Whirlpool Duet dryer’s stuck-on sensing issue, it is necessary to check the continuity of the circuit created by the start switch and other electrical components. 

If there is no continuity in this circuit, then it means that the start switch needs to be replaced. A qualified technician should be contacted to safely replace the start switch and restore your Whirlpool Duet dryer’s functionality.

5. Thermal Fuse Issue

The thermal Fuse is a key component in dryers that prevents the appliance from overheating and catching fire. It usually trips when the temperature gets too high, thus cutting power to the motor and stopping the dryer from working. 

If your Whirlpool Duet Dryer is stuck on sensing, it could be due to a faulty thermal fuse. To test it, you will need to locate the thermal fuse in your dryer and check for continuity with a multimeter. If there is no continuity, then the thermal fuse needs to be replaced. 

Replacing the thermal fuse can easily be done with just a few simple tools like screwdrivers and pliers. Once the new fuse has been installed, the dryer should be back to its normal operation. If this process does not solve the issue, then it may be time to seek professional help.

6. Clogged Lint Filter

Clogged lint filters are a common problem with many dryers, and Whirlpool Duet dryers are no exception. The filter is an important part of the drying process – it collects lint and other debris that can become lodged in the ductwork, reducing air flow and leading to overheating. 

When this occurs, the dryer may become stuck in “Sensing” mode and will not start up until the lint filter is cleaned.

To clean out your Whirlpool Duet Dryer’s lint filter, first unplug the dryer from the wall outlet. If you have a removable filter, gently pull it out and empty any accumulated lint. 

If your filter is not removable, turn the dryer upside down and use a vacuum hose to remove lint from the inside of the filter.

7. Contact Customer Service

If your Whirlpool Duet Dryer is stuck on the Sensing cycle, it can be difficult to fix the problem on your own. In this case, it may be best to contact Costumer Service for help. 

Depending on your issue, you may need to book an appointment with a technician or speak to someone over the phone. 

You can usually find contact information for your local Customer Service department on Whirlpool’s website.


We have discussed the various solutions to fix a Whirlpool Duet dryer stuck on sensing. If you’ve tried all of these steps and are still struggling with your machine, it may be time to call in an expert. 

A qualified technician can diagnose any deeper issues that could be causing this problem for you. 

Although this issue is quite common among owners of Whirlpool Duet Dryers, there’s no need to worry too much if yours has become stuck on sensing mode as long as you take the right troubleshooting steps—which we hope our article was able to provide!


What could cause my Whirlpool Duet Dryer to get stuck on sensing?

 There are several possible causes for your dryer getting stuck on sensing. It could be due to problems with the moisture or temperature sensors, the door latch, the drive motor, or a problem within the control board. 

It’s also possible that there is lint clogging up the vents or exhaust system of your dryer. If none of these potential causes solve the problem, it may be necessary to replace parts or call a professional repair service.

What should I do if my Whirlpool Duet Dryer won’t turn on?

If your dryer won’t turn on, the first thing you should check is to make sure that the power cord is plugged into a working outlet. If it is, then you may need to replace the thermal fuse or reset the circuit breaker connecting the dryer to your home’s electrical system. 

It’s also possible that an internal part of the dryer has failed and needs to be replaced. If none of these potential solutions solve the problem, you may need to call a professional repair service.

How can I prevent my Whirlpool Duet Dryer from getting stuck on sensing in the future?

To prevent your dryer from getting stuck on sensing again, be sure to clean out the lint screen after every use. You should also check the exhaust system of your dryer periodically to make sure that it is not clogged or blocked. 

Make sure you regularly inspect and replace any worn parts, such as door latches and belt drives, to keep everything in proper working order. 

Finally, if you notice any strange noises or performance issues with your dryer, take action right away to ensure it continues running smoothly.

What should I do if my Whirlpool Duet Dryer stops heating?

A: If your dryer stops heating, the first thing you should check is to make sure that the thermal fuse has not been blown. A faulty thermostat or motor could also be causing the problem. 

If none of these potential fixes solve the issue, it may be necessary to replace parts or call a professional repair service. Additionally, it’s important to ensure your dryer vents and exhaust system are in working order as clogs can prevent proper air flow. 

Regularly cleaning out lint screens will help reduce the risk of this happening.

Traeger Ironwood 650 Problems

Traeger Timberline XL Problems

Traeger Silverton 810 Problems

why Is My Traeger Dropping Temperature

Scroll to Top