Traeger Ironwood 885 Problem (With Fixes)

The Traeger Ironwood 885 is one of the most popular pellet grills on the market, but it’s not without its problems. 

Many users have reported a range of issues with their Traeger Ironwood 885, from smoke detectors going off to poor temperature control. 

Fortunately, there are some simple fixes that can help you get your grill back up and running in no time. 

In this article, we’ll take a look at some common problems with the Traeger Ironwood 885 and how to solve them.

Traeger Ironwood 885 Problem

1. Display Problem

Display Problems can refer to a variety of issues that may arise with the Traeger Ironwood 885, including issues with the display screen not turning on correctly, the screen not displaying properly or accurately, or the display not showing the right information. 

Common solutions may include resetting the unit by unplugging it and plugging it back in, checking connections and cables, or performing a firmware update. 

If none of these solutions work, then it may be necessary to get in touch with Traeger customer service for further assistance.

2. Smoke Problem

Smoke can be a common problem with the Traeger Ironwood 885 pellet grill. Smoke occurs when too much heat is generated, and it can cause your food to taste overly smoky and produce an unpleasant odor. 

The most common causes of smoke include improper setup of the burn pot, not enough pellets in the burn pot, or an imbalance of pellets in the burn pot. 

To troubleshoot these issues, first, make sure that your grill is properly set up and has enough fuel to produce smoke. 

Then look for any air leaks which may be causing a lack of oxygen necessary for combustion. Lastly, check to see if you have an even balance of pellets in the burn pot.

3. Temprature Problem

The Traeger Ironwood 885 has been designed to provide maximum cooking performance, but it is possible for users to experience issues with temperature control. 

This issue can be caused by a few different factors, such as incorrect settings, an inadequate amount of fuel in the hopper, or a malfunctioning igniter.

When users experience temperature control issues, the first step is to check that the settings are correct. 

The temperature should be set high enough for the desired cooking results and low enough so that it doesn’t exceed the maximum temperature. 

If this has been checked and there are still issues, a technician should be called in to investigate further.

4.WiFi Issue

WiFi issues with the Traeger Ironwood 885 can be a frustrating experience, as they can prevent you from enjoying your meals perfectly cooked. 

WiFi connectivity issues may arise due to several factors, such as incorrect setup of the grill, poor network signal strength, and outdated software. 

To ensure that your Traeger Ironwood 885 is always connected to your home network, try the following troubleshooting steps.

First, check that your router is functioning properly and that it is up to date with its latest firmware. If you find that the router is outdated, try updating it as this may help resolve any connection issues.

Second, make sure the Traeger Ironwood 885 has been properly set up and configured. If the settings are incorrect, it may not be able to connect to your home network.

Third, check the signal strength of your home network. If the signal is weak or unreliable, try moving your router closer to the Traeger Ironwood 885 and repositioning it for a better connection.

Finally, check that the Traeger Ironwood 885 software is up to date. If not, update it to the latest version and try connecting again.

5. Fan Problem

Fan problems are one of the most common issues that can arise with a Traeger Ironwood 885 pellet grill. 

This could be due to a variety of factors, such as an accumulation of debris or dust in the fan and/or motor, a malfunctioning fan/motor, or even a poor electrical connection between the fan and the controller board. 

If you’re experiencing problems with your fan, it may be time for a little troubleshooting.

The first thing to check is whether the fan motor is running properly. To do this, open the access panel on the side of your pellet grill and locate the fan/motor assembly. 

Gently rotate the shaft of the motor to see if it’s running smoothly. If the motor is stuck, this could be a sign of an obstruction or other issue with the fan.

6. Lid Not Sealing

The Traeger Ironwood 885 is designed to provide you with maximum cooking capacity and precise temperature control. However, if the lid does not seal properly, it could lead to uneven cooking temperatures and loss of smoke flavor. 

To ensure a proper lid seal, check for any obstructions that may be keeping the lid from closing securely. Make sure that the lid latch is in good working order and properly aligned with the lid. 

Also, check for any foreign material around the edge of the gasket that could be preventing it from making a tight seal. 

If necessary, replace any faulty components and clean the gasket to improve its sealing ability.


The Traeger Ironwood 885 is a powerful and reliable pellet grill that offers an impressive range of features. 

It has many advantages such as its precise temperature control, easy-to-use digital controls, fast preheat time, and the ability to cook with either direct or indirect heat. 

While this model does have some drawbacks like being heavy and having a smaller grilling area than other models, it still provides excellent performance for those looking for great grilled food. 

Therefore, if you’re in the market for a top-of-the-line pellet smoker/grill then the Traeger Ironwood 885 should definitely be on your list of choices!


How do I reset my Traeger Ironwood 885?

To reset your Traeger Ironwood 885, you need to first turn the pellet grill off and unplug it. Wait 30 seconds before plugging it back in. 

Once plugged in, press the power button and hold for 10 seconds until you hear a double ‘beep’. This indicates that your Traeger Ironwood 885 has been reset successfully. If desired you can then turn on the pellet grill as normal.

Is Traeger Ironwood 885 too big?

No, the Traeger Ironwood 885 is not too big. It has an upper cooking rack that is 18 inches wide and a lower warming rack that is 22 inches wide, with a total of 885 square inches of cook space. 

This makes it great for grilling larger amounts of food for more people quickly and efficiently. In addition, the unit includes a digital controller which allows users to precisely control their desired temperature settings. 

Overall, this grill provides plenty of room and features to make outdoor cooking enjoyable.

How many briskets in a Traeger 885?

The Traeger Ironwood 885 offers a large cooking area of 885 square inches, which is enough to cook up to 6 full-size briskets simultaneously. 

It also has a pellet hopper with a capacity for 20 pounds of pellets, offering longer cook times and the ability to smoke food for up to 10 hours without needing more fuel. 

With its precise temperature control and advanced grilling technology, the Ironwood 885 allows you to fully customize your grilling experience and get perfectly cooked meats every time.

How long does it take to heat up a Traeger Ironwood 885?

It typically takes about 10-15 minutes for the Traeger Ironwood 885 to heat up. To achieve the desired temperature just adjust the knob to your setting and wait for a few minutes until it reaches that level. 

It’s important to note that it will take longer to reach higher temperatures as opposed to lower ones. 

Traeger Auger Stops After a Few Minutes

Traeger Silverton 620 Problem

Traeger Scout Problems

Traeger Ironwood 650 Problems

Scroll to Top